S2000 Elite - User's Guide
035-00707 Revision 1
5
1.1. Introduction
The OmniCure® S2000 Elite represents a new standard in UV Curing. It gives you the power,
control and reliability never before available in such a cost-effective UV curing system. The
S2000 Elite joins the Excelitas Canada family of light systems offering the same high level of
innovation, quality and reliability that our customers have come to expect. Since 1982,
OmniCure has combined next-generation optical engineering, state-of-the-art electronics and
fiber-optics to produce sophisticated technologies that employ light. Today Excelitas Canada is
a leading developer of light-based systems for sectors ranging from manufacturing to bio-
medicine and we are unmatched in our commitment to quality and service.
The heart of the OmniCure® S2000 Elite is a proprietary 200-watt mercury short arc lamp with
a 2000-hour guaranteed lifetime. This extended lifetime is made possible by the proprietary
technology incorporated into the design of the system. The lamp is mounted in an elliptical
reflector with a proprietary coating to provide excellent spectral and power output.
The S2000 Elite contains an iris as well as a mechanical precision shutter. The iris is
adjustable in 1% increments to provide exact amounts of light to your application. To set your
OmniCure S2000 Elite system at specific irradiance levels (W/cm
2
), we suggest adding the
OmniCure model R2000 handheld Radiometer to your OmniCure S2000 Elite system. Other
standard features incorporated in the S2000 Elite include:
• 4.3” LCD touch screen display with all-new intuitive UI
• Identical spectrum and optical power as the original S2000
• Closed-Loop Feedback light delivery regulation
• Accessory and radiometry compatibility with original S2000 – OmniCure R2000, cure
site radiometer, light guides
• Intelli-Lamp technology (Lamp life, security, consistency)
• Precision shutter with 30 milliseconds light delivery response time
• Light delivery calibration to intensity (W/cm
2
) or optical power (W)
• Field swappable optical filters, choose from 7 different options
• WEB UI wireless remote control and monitoring from any device through ethernet
• Intelli-Tap™ NFC (Near Field Communication) used for Supervisor and Admin card
• Process security – ability to lock system to prevent process tampering
• Advanced StepCure® program
• USB 2.0 with speeds up to 12Mb/s
• PLC Controller capability
• PLC compatibility to original S2000 XLA – External PLC adapter and command set
• SD card for recording, saving and loading
• Field swappable lamps, between Standard and Surface Cure
• Cleanroom ready & compatible with exhaust duct attachment points
This guide describes how to assemble, use, and maintain the OmniCure S2000 Elite light-
curing spot lamp system safely and efficiently. Excelitas Canada prepared this user guide for
engineers, technicians, and manufacturing personnel. If you are new to operating ultraviolet
light-curing equipment, contact an OmniCure representatives to answer your questions before
using the equipment.
To Next Page
Loading...
Need help?
General