Excelitas Technologies OmniCure S2000 Elite User Manual

S2000 Elite - User's Guide
035-00707 Revision 1
75
8. LED Light Ring
The LED light ring indicator displays the status of the following:
• Light Guide
• Lamp
• Shutter
• Calibration
• Software Update
The following table describes LED status and descriptions of each status in details.
Description
LED Indicator
Closed-loop feedback calibration in-process
Green – Blinking 1 second
Closed-loop feedback active
Green
Light guide not detected
Red
Light guide detected (closed loop feedback active)
Green
Light guide detected (closed loop feedback at 95% to 99%
intensity level)
Yellow
Light guide detected (closed loop feedback inactive)
Magenta
Lamp warming up from cold (Power off) or sleep
Blue
Lamp warming up from idle mode
Cyan
Lamp not lit (Sleep Mode)
White
No lamp detected
Red – Blinking 1 second
Alarm or Fault detected
Red – Blinking 0.5 second
Software update in progress
Green - Blinking 0.5 second
Software update - waiting for USB connection
Blue - Blinking 0.5 second

Excelitas Technologies OmniCure S2000 Elite Specifications

General

Brand	Excelitas Technologies
Model	OmniCure S2000 Elite
Category	Industrial Equipment
Language	English