S2000 Elite - User's Guide
035-00707 Revision 1
77
10. Remote Automated Control Requirements
The S2000 Elite system is designed to provide remote automated control of the UV spot curing
system from a PC through the USB port, RS232 port, and it is also accessible via TELNET and
Direct IP
The specification in the following topics are used to describe the communication protocol
between the S2000 Elite unit and a PC.
Operating System: Windows 8 minimum. Windows 10 recommended.
*If using an older operating system, contact Excelitas Canada
If the user does not observe and adhere to the protocol and command timing
specifications, abnormal unit operation will result!
To Next Page
Loading...
Need help?
General