Excelitas Technologies OmniCure S2000 Elite

S2000 Elite - User's Guide
035-00707 Revision 1
80
11. StepCure®
The OmniCure® S2000 Elite allows automation of your production environment using the
StepCure® run-time and programming engine. The StepCure engine runs profiles which are a
sequence of instructions that are executed in a prescribed order. These profiles can be created
to meet the varying degrees of complexity required by the user's unique application.
StepCure can be used to replace Programmable Logic Controllers (PLC) that maybe
used on your process lines. Programming profiles is similar to programming PLCs
and can be thought of as a pseudo ladder logic.
The following sections will describe how to use StepCure:
• StepCure Profiles
• StepCure Elements
• Sample Profiles