Excelitas Technologies OmniCure S2000 Elite

S2000 Elite - User's Guide
035-00707 Revision 1
73
7.4. Radiometer RS-232 Phono Connector: Signal Descriptions
The front panel RS-232 stereo phono connector is labelled “Radiometer”. This connector is
used to connect S2000 Elite to the R2000 Radiometer for calibration and setup purposes. It is
a RS-232 connector dedicated to communication with the R2000 Radiometer.
PIN NO
SIGNAL NAME
1 (Shield)
GND
2 (Ring)
Tx
3 (Tip)
Rx