S2000 Elite - User's Guide
035-00707 Revision 1
47
Network Setup
Selecting this will display the network parameters and settings needed for communication over
Ethernet. Addresses can be set using DHCP or manually. When set to DHCP, only the Host
Name can be configured.
IP Address - IP address is the host identification
number used for proper communication between
devices.
Subnet Mask - The subnet mask is used to
distinguish the subnet part of the IP address, as well
as the part that is the host address of that subnet
Gateway - The gateway is a network device that acts
as an entry point from one network to others. The
host sends all packets directed to other hosts outside
the local network to the default gateway.
DNS Server - DNS (Domain Name System) service
is used to change public (external) IP addresses from
numeric to a domain format.
Host Name - The unique identifier that serves as the
name of your unit. It can be as long as 255
characters and consists of numbers and letters.
Date/Time Settings
Selecting this will display the system date and time related settings. The user can select the
time format and the source of the time.
Date Format - Select the desired date format from the
three choices.
Time Format - Select if the time should be displayed
in 12 or 24 hour format.
Time Sync - Select the time source over NTP or
manual.
To Next Page
Loading...
Need help?
General