Excelitas Technologies OmniCure S2000 Elite User Manual

S2000 Elite - User's Guide
035-00707 Revision 1
70
34(+)
Active: Lamp is on.
Inactive: Lamp is off.
19(-)
Output
Digital
Shutter Verification:
Reports shutter position when shutter mode select is enabled
Active: Shutter is in the open position
Inactive: Shutter is in the closed position
35(+)
22(-)
Output
Digital
Cooling:
Indicates that the system is cooling to restrike.
Active: Cooling state is active.
Inactive: The system is not in the cooling state.
5(+)
37(-)
Output
Digital
Shutter Alarm:
Indication of shutter failure.
Active: Shutter has failed.
Inactive: No shutter failure detected.
20(+)
38(-)
Output
Digital
Bulb Alarm:
Indication of lamp failure.
Active: Lamp has extinguished unexpectedly.
Inactive: No lamp failure detected.
21(+)

Excelitas Technologies OmniCure S2000 Elite Specifications

General

Brand	Excelitas Technologies
Model	OmniCure S2000 Elite
Category	Industrial Equipment
Language	English