Run three different exposure
profiles and then repeat the
cycle for three iterations.
In this example, the following
behavior occurs when the
Start/Stop button is pressed:
1. Shutter ON for 2 seconds
at 10% Intensity
2. Dwell for 2 seconds
3. Shutter ON for 1 second at
15% intensity
4. Dwell for 1 second
5. Shutter ON for 5 seconds
at 10% Intensity
6. Dwell for 2 seconds
7. Repeat Step 1
The operation will end once the
cycle has gone through 3
iterations
To Next Page
Loading...