Accessing Your Unit Remotely
196 FTB-1v2 and FTB-1v2 Pro
Working With VNC
Working With VNC
The control of your unit with VNC requires the UltraVNC Server (already
installed on your unit) and a VNC viewer (that you must install on your
computer).
To be able to connect to the unit using VNC, you must:
 Know the IP address of the unit and provide it in the connection
settings on the computer.
 Know the password (same for all users by default).
This section provides you with the basic information to control your unit
with VNC.
To Next Page
Loading...
Need help?
General
