FTB-1v2 and FTB-1v2 Pro 255
12 Using Your Unit and Modules
in an Automated Test
Environment
EXFO supplies commands that follow the guidelines determined by the
SCPI consortium for all available instruments. EXFO also supplies COM
properties and events allowing you to build your own application.
The present chapter gives you information to help you use the provided
commands as well as COM properties and events to remotely control your
instruments.
If you need information on how to prepare your unit for remote control, see
the corresponding section in this documentation.
Note: To have access to automation features on an FTB-1v2 unit, you must
purchase the Automation option.
To Next Page
Loading...
Need help?
General
