Safety Information
20 FTB-1v2 and FTB-1v2 Pro
Laser Safety Information
Laser Safety Information
Units with a Built-In VFL
Your instrument is in compliance with standards IEC 60825-1: 2007 and
2014.
Laser radiation may be encountered at the optical output port.
The following label(s) indicate that the product contains a Class 2 source:
The VFL laser is active when the symbol is displayed in the power
meter and VFL application.
The modules that you use with your unit may have different laser classes.
Refer to the user guide or the online help of the different modules for the
exact information.
Units without a Built-In VFL
If your unit is not equipped with a VFL, the laser class of your unit depends
on the modules that you use. Refer to the user guide or the online help of
the different modules for the exact information.
Affixed to the back of the unit.
To Next Page
Loading...
Need help?
General
