EXFO FTB-1v2 Pro User Manual

IEEE 488.2 and Specific Command Reference
FTB-1v2 and FTB-1v2 Pro 387
IEEE 488.2 Required Commands
*ESE
Description The *ESE command sets the Standard Event
Status Enable Register bits, as defined in the
table below. This register contains a mask value
for the bits to be enabled in the Standard Event
Status Register.
Syntax *ESE<wsp><RegisterValue>
Parameter(s) RegisterValue:
The program data syntax for <RegisterValue> is
defined as a <DECIMAL NUMERIC PROGRAM
DATA> element.
The <RegisterValue>, expressed in base 2,
represents the bit values of the Standard Event
Status Enable Register.
PON URQ CME EXE DDE QYE N.U. OPC
MSB LSBStandard Event Status Enable Register

EXFO FTB-1v2 Pro Specifications

General

Brand	EXFO
Model	FTB-1v2 Pro
Category	Measuring Instruments
Language	English