SCPI-Based Errors
440 FTB-1v2 and FTB-1v2 Pro
–284 “Program currently
running”
[Certain operations dealing with programs may be
illegal while the program is running; for example,
deleting a running program might not be possible.]
–285 “Program syntax error” [Indicates that a syntax error appears in a
downloaded program. The syntax used when
parsing the downloaded program is
device-specific.]
–286 “Program runtime
error”
-----
–290 “Memory use error” [Indicates that a user request has directly or
indirectly caused an error related to memory or
<data_handle>, this is not the same as “bad”
memory.]
–291 “Out of memory” -----
–292 “Referenced name
does not exist”
-----
–293 “Referenced name
already exist”
-----
–294 “Incompatible type” [Indicates that the type or structure of a memory
item is inadequate]
–300 “Device-specific error” [This is the generic device-dependent error for
devices that cannot detect more specific errors.
This code indicates only that a Device-Dependent
Error as defined in IEEE 488.2, 11.5.1.1.6 has
occurred.]
–310 “System error” [Indicates that some error, termed "system error"
by the device, has occurred. This code is
device-dependent.]
–311 “Memory error” [Indicates some physical fault in the device's
memory, such as parity error.]
Error
Number
Description Probable Cause
To Next Page
Loading...
