COM Properties and Events
FTB-1v2 and FTB-1v2 Pro 453
Properties
LockoutState
Description This property returns or sets the device’s lockout
state.
Syntax object.LockoutState (to retrieve the state)
object.LockoutState=State (to set the state)
State: a Boolean value corresponding to:
True: Lockout
False: No lockout
Parameter(s) None.
Response(s) If the property is used to get the device’s lockout
state, the property will return a Boolean value.
Access Get/Set
StatusByte
Description This read-only property returns the device’s
status byte. Refer to IEEE 488.2 standard for
status byte description.
Syntax object.StatusByte
Parameter(s) None.
Response(s) A value corresponding to the device’s status byte.
Notes This property can be used in conjunction with
RequestService event (see RequestService on
page 454) to find out why the device caused a
Service Request (SRQ).
Access Get
To Next Page
Loading...
