Communicating Through TCP/IP Over Telnet
462 FTB-1v2 and FTB-1v2 Pro
Accessing Modules
A module is released by one of the following actions:
Executing the CLOSE LINS command to disconnect the link with the
module. For more information, see CLOSE LINS on page 467.
Executing the CLOSE command to end the current session once the
execution of all the desired commands has been completed. For more
information, see CLOSE on page 466.
Closing the current session by clicking the Close button on the Telnet
editor windows’ title bar.
Shutting down and restarting the client computer.
A network interruption.
A module can also be released when you terminate the communication by
using the KILL LINS command. For more information, see KILL LINS on
page 471.
To Next Page
Loading...
