Communicating Through TCP/IP Over Telnet
470 FTB-1v2 and FTB-1v2 Pro
Internal Commands of the TCP/IP over Telnet Protocol
Examples
Notes
On all platforms except IQS-600 and FTB-500, for
compatibility reasons, you can connect to a
module with a valid instrument command and a
valid LINS (such as
Lins10:SOURce:DATA:TELecom:CLEar).
However, there will be no way for other sessions
to know that you are connected to this
instrument.
If the command is not executed successfully, the
possible reasons could be:
The module is already connected to
a different client session.
The provided information does not
correspond to a valid LINS.
CONNECT LINS
To Next Page
Loading...
