Getting Started with Your Unit
FTB-1v2 and FTB-1v2 Pro 65
Using a Keyboard, Mouse or Other USB Devices
You can connect several devices at the same time.
To use a USB device with your unit:
Connect the USB device to any of the USB ports located on the top of the
unit (see Top panel on page 4).
Note: It is not necessary to turn off the unit before connecting the USB device. The
software will automatically detect its presence.
Your device is auto matically recognized and immediately usable (provided
that it uses the drivers already available on your unit).
Mobile broadband
USB modem key
To access the Internet without having to connect to a
Wi-Fi or an Ethernet network. For more information,
see Accessing the Internet with a Mobile Broadband
USB Modem Key on page 131.
USB to RS-232
adapter
(purchased from
EXFO)
To be able to transfer data between your unit and a
device only equipped with RS-232 (serial) ports. For
more information, see Using the USB to RS-232
Adapter on page 163.
Device Details
To Next Page
Loading...
Need help?
General
