BlackDiamond 8800 Series Switches Hardware Installation Guide
165
Do not use the fan tray handle to lift or maneuver the BlackDiamond 8810 chassis. This handle is not
designed to support the weight of the chassis.
7 At each corner, attach a restraining bolt to the shipping bracket, securing the BlackDiamond 8810
chassis to the shipping pallet (see Figure 120).
Figure 120: Recrating the BlackDiamond 8810 Chassis
8 Set a corner brace at each corner of the chassis, and slide the shipping carton down over the chassis.
Figure 121: Placing the Shipping Carton over the BlackDiamond 8810 Chassis
To Next Page
Loading...
