Extreme Networks BlackDiamond 8810 - Page 96

Installing the BlackDiamond 8800 Series Chassis
BlackDiamond 8800 Series Switches Hardware Installation Guide
96
To ground the chassis:
1 Locate the grounding point on the back of the chassis (Figure 60 and Figure 61).
Figure 60: Back of BlackDiamond 8806 Chassis
Figure 61: Back of BlackDiamond 8810 Chassis
2 Strip 0.5-inch (1.2-cm) of insulation from the stranded copper wire cable.
3 Insert the stripped wire into the cable lug.
EX_128a
ASP044a