Summit X750 Series Switches
Summit Family Switches Hardware Installation Guide
135
Right digit (1 – 8) Indicates the position of this switch in the SummitStack configuration.
Upper half blinking This switch is the stack master node.
Lower half blinking This switch is the stack backup node.
Lit steadily This switch is a standby node in the stack.
Stacking ports 40G mode
(V160 and V320 stacking)
101, 102, 103, and 104
Steady blue Link OK
Blinking blue Activity
Off No link or port disabled.
Stacking Ports 10G mode
(Alternate stacking)
103 and 104
Steady green Link OK
Blinking green Activity
Off No link or port disabled.
Table 37: LEDs on the Summit X750 Series Switches (Continued)
Label or Type Color/State Meaning
To Next Page
Loading...
