Installing Summit X650 Power Supplies
Summit Family Switches Hardware Installation Guide
283
Figure 231: Installing a Power Supply
5 To install a second power supply, repeat steps 3 and 4.
NOTE
If power supplies are not installed in both power supply bays, be sure to install a cover over the
unoccupied bay. Unoccupied bays must always be covered to maintain proper system ventilation and EMI levels.
6 Connect an appropriate AC power cord to the power input socket; connect the other end of the
power cord to a grounded AC power outlet.
WARNING!
Always be sure that the source outlet is properly grounded before plugging the AC power cord into
the unit.
SH_089
To Next Page
Loading...
