Chapter 9: Replacing AC Power Supplies in Summit Family Switches
Summit Family Switches Hardware Installation Guide
348
6 Carefully slide the power supply all the way into the power supply bay (Figure 289). Push the power
supply in until the latch snaps into place.
Figure 289: Installing a Summit 750 W AC Power Supply
CAUTION
Do not slam the power supply into the switch.
7 If necessary, slide the plastic cord retainer farther away from the back of the switch (Figure 290).
Figure 290: Moving the Power Cord Retainer
SH_205
SH_227
To Next Page
Loading...
