Extron electronics IN1608 xi IPCP SA with LinkLicense User Manual

IN1608 xi Scaling Presentation Switcher • Internal Web Pages 125
Figure 82. License Information Dialog Box
To view a copy of a listed package license, click the link in the License column for the relevant
package (see Licensed Third-Party Software Used in the Scalers on page 11).
Device Name Page
The Device Name page allows you to assign or change the name or hostname of the
connected device. Click the Device Name icon (see figure 81,
3
, on the previous page) on
the Hardware Global Navigation Bar to open this page.
Figure 83. Device Name Page
NOTE: The device name is used as the hostname of the scaler.
To assign or change the hostname:
1. Enter a name for the device in the name field (see figure 83,
1
). This name can be from
2 to 63 characters in length with no spaces between characters. Only alphanumeric
characters and the hyphen are valid. The first character must be alphabetical, and the
last one cannot be a hyphen (-). If an invalid name is entered, a red symbol appears to
the right of the name field.
2. Click the Apply button (
2
) to change the name or click the Cancel button (
4
) to keep
the previous name.
To reset the device name to the default: Click the Reset to Default button (
3
). The
default device name consists of the model name, followed by the last three hexadecimal
character pairs of the product MAC (hardware) address. All parts of the name are separated
by hyphens. For example: IN1608-xi-IPCP-SA-13-E5-5D.

Extron electronics IN1608 xi IPCP SA with LinkLicense Specifications

General

Brand	Extron electronics
Model	IN1608 xi IPCP SA with LinkLicense
Category	Media Converter
Language	English