IN1608 xi Scaling Presentation Switcher • Internal Web Pages 121
Device Settings Page
The Device Settings page allows configuration of screen saver settings, auto switch
modes, HDCP notifications, video and sync muting, on-screen display timeout, HDCP
modes, and RS-232 insertion modes. Click the Device Settings icon (see figure 54,
8
,
on page 91) on the Global Navigation Bar to open the Device Settings page (see
figure 80).
Figure 80. Device Settings Page
Screen Saver panel
When no active video is detected on the selected input, the screen saver mode is activated.
The output sync can be disabled after a user-set duration, which allows display devices to
go into a low power, standby state.
1. Click one of the radio buttons (
1
) to select a display when the screen saver is enabled.
• Black — Mutes video output to black for a set duration before disabling output
sync (default).
• Blue with On Screen Display (OSD) Bug — Displays a blue background with
a moving OSD message that indicates <scaler model>: Input <number> No
Signal for a set duration before disabling the output sync.
To Next Page
Loading...
Need help?
General
