IN1608 xi Scaling Presentation Switcher • Internal Web Pages 131
To create or change an administrator password:
1. In the Administrator Password field (see figure 90,
1
, on the previous page) enter
the desired administrator password.
2. In the Confirm Password field (
2
), reenter the administrator password.
NOTE: Select the Show Characters checkbox (
3
) to display the password characters.
3. Click the Apply button (
7
).
To create a user password:
NOTE: A user password cannot be set until an administrator password has been entered.
1. In the User Password field (
4
), enter the desired user password.
2. In the Confirm Password field (
5
), reenter the user password.
NOTE: Select the Show Characters checkbox (
6
) to display the password characters.
3. Click the Apply button (
7
).
Reset Device Page
The Reset Device page allows the user to reset the device. Click on the Reset Device
icon (see figure 81,
9
on page 124) on the Global Navigation Bar to open the page.
Figure 91. Reset Device Page
Three reset options are available from this page (see figure 91,
1
):
• Reset Device Settings (Retains TCP/IP Settings) — Resets the settings associated
with input settings, the output image, EDID, and audio, and also includes presets and
auto memories (excludes communication settings).
NOTE: Communication settings include the IP address, subnet mask, gateway
IP address, DHCP setting, and port mapping.
• Reset Device Settings and Delete Files (Retains TCP/IP Settings) — Resets
all settings on the device to factory defaults (deletes user files), except the Ethernet
settings.
• Reset All Settings and Delete Files — Resets all settings on the device to factory
defaults, including the communication settings (deletes user files). This is equivalent to
the
E
ZQQQ
}
SIS command.
To Next Page
Loading...
Need help?
General
