Extron electronics IN1608 xi IPCP SA with LinkLicense User Manual

IN1608 xi Scaling Presentation Switcher • Installation 14
Installation Overview
1. Turn off or disconnect all related equipment. Ensure that video sources and output
displays are all turned off and disconnected from the power source.
2. Mount the scaler (see Mounting on page 133).
3. Connect input sources (see Power and Input Connections on the next page).
4. Connect output devices (see Output Connections on page 17).
5. Connect desired control devices (see Control Connections on page 19 or
IPCP Pro 355 Control Processor Connections on page 20).
6. Connect a power source to the scaler (see Power and Input Connections).
7. Configure the scaler (see Control Methods on page 7).
Rear Panel Connections
Figure 7 shows the rear panel connectors available on most IN1608 xi models (the
IN1608 xi SA is used as an example). For information on the IPCP Pro 355 control
processor module, see IPCP Pro 355 Control Processor Connections.
100-240V ~ 1.3 A MAX
1
2
CONFIGURABLE
HDMI
HDMI
5
6
7
8
1C
RS-232 IR
RS-232 IR
Tx Rx Tx RxG
Tx Rx Tx RxG
Tx Rx Tx RxG
HDMI
1A
1B
3
4
INPUTS
OUTPUTS
Tx Rx
RS-232
G
LAN
2x25W(8Ω)/2x50W(4Ω)
RESET
AUDIO INPUTS
OUTPUTS
REMOTE
LL1
RR
L2
R
L
3
R
CLASS 2 WIRING
L4
R
L5
R
+48V
+48V
12
LR
VARIABLE
IN1608 xi SA
2
MIC/LINE
L6
R
SIG LINK
DTP IN
SIG LINK
DTP IN
SIG LINK
OUT
50/60 Hz
RS-232 IR
OVER DTP
OVER DTP
OVER TP
AMPLIFIED OUTPUT
DTP
HDBT
AABBC
B
B
A
Power and input connections
B
Output connections
C
Control connections
Figure 7. Rear Panel Connectors (IN1608 xi SA Example)

Extron electronics IN1608 xi IPCP SA with LinkLicense Specifications

General

Brand	Extron electronics
Model	IN1608 xi IPCP SA with LinkLicense
Category	Media Converter
Language	English