IN1608 xi Scaling Presentation Switcher • Operation 41
Communication Submenu
Figure 32. Communication Submenu
The Communication submenu displays RS-232 settings, current IP configuration (DHCP
mode, IP address, Subnet mask, and Gateway address), and MAC address.
Press and hold the Enter button for 10 seconds to edit the submenu items listed below.
• Remote Port — Displays the baud rate for the serial RS-232.
• MAC Address — Displays the MAC address of the device (read only).
• DHCP Mode — Press the navigation buttons to turn the DHCP mode on or off. The
default is Off.
• IP Address — Press the
and
buttons to select an octet of the IP address.
Press the
>
and
<
buttons to adjust the value of the selected octet. The default is
192.168.254.254.
• Subnet Mask — Press the
and
buttons to select an octet of the subnet mask
address. Press the
>
and
<
buttons to adjust the value of the selected octet. The
default is 255.255.255.0.
• Gateway — Press the
and
buttons to select an octet of the gateway address.
Press the
>
and
<
buttons to adjust the value of the selected octet. The default is
0.0.0.0.
To Next Page
Loading...
Need help?
General
