IN1608 xi Scaling Presentation Switcher • Internal Web Pages 97
EDID Library and EDID files
The EDID Library contains the list of available EDID files.
To add EDID files to the EDID Library:
1. Click the Upload EDID to [Scaler] button (see figure 58,
9
, on page 95). The Browse
Add EDID to Library window opens.
2. Navigate to the desired EDID file location and select the EDID file.
NOTE: Valid EDID files have a .bin file extension.
3. Click the Open button. The EDID is added to the Available EDIDs pane (
4
).
To save configurations as EDID files to a PC:
1. From the Connected Outputs (
3
), Available EDIDs panel (
4
), or the Inputs list
(
6
), right-click on an EDID or input.
2. Select Save EDID to PC.
3. Click the OK button to save the file.
NOTE: Saving a factory scaler EDID exports an HDMI, LPCM-2Ch EDID to the PC. The
file is saved as a .bin file.
Image Settings Page
The Image Settings page adjusts signal sampling and picture control settings, saves and
recalls user and input presets, and applies overscan settings. Click the Image Settings
icon (see figure 54,
4
on page 91) on the Global Navigation Bar to open the Image
Settings page.
Figure 59. Image Settings Page
To Next Page
Loading...