Extron electronics IN1608 xi IPCP SA with LinkLicense User Manual

IN1608 xi Scaling Presentation Switcher • Internal Web Pages 128
Executive and Power Mode Page
The Executive and Power Mode page contains options for enabling or disabling the front
panel lockout and power modes. Click the Exec/Power Mode icon (see figure 81,
6
on
page 124) on the Global Navigation Bar to open the page.
Figure 87. Executive/Power Mode Page
Executive mode
Front panel lockout (executive) mode locks the front panel functions of the scaler.
1. Select one of the following radio buttons (see figure 87,
1
) to set the Executive mode
(see Front Panel Lockout (Executive Modes) on page 42).
• Unlock the Front Panel (default)
• Mode 1: Lock Front Panel (complete lockout)
• Mode 2: Limit Front Panel To Input Selection and Volume
2. Click the Apply button (
3
).
Power mode
The low power (standby) state disables all audio and video input processing and all audio
and video outputs to save energy when the scaler is not in use.
1. Click the Full Power radio button or the Low Power - Standby State radio button (
2
)
to select the desired power mode.
NOTE: It takes approximately 5-10 seconds to return the scaler to full power mode.
Entering low power mode occurs immediately.
2. Click the Apply button (
3
).

Extron electronics IN1608 xi IPCP SA with LinkLicense Specifications

General

Brand	Extron electronics
Model	IN1608 xi IPCP SA with LinkLicense
Category	Media Converter
Language	English