Fagor CNC 8060 - Page 695

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·695·
PLC consulting logic signals; general.
(V.)PLC.SPN6
(V.)PLC.SPN7
Variable that can only be read from the program and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The channel indicates in these registers which spindle of the channel the M functions pending
execution are addressed to.
There is a register for each channel. The mnemonics for each channel are the following. Here
is an example of the mnemonics for SPN1; it is the same for the rest of the registers.
(V.)PLC.MFUN1
(V.)PLC.MFUN2
(V.)PLC.MFUN3
(V.)PLC.MFUN4
(V.)PLC.MFUN5
(V.)PLC.MFUN6
(V.)PLC.MFUN7
Variable that can only be read from the program and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The channel indicates in these registers the H functions pending execution.
There is a register for each channel. The mnemonics for each channel are the following. Here
is an example of the mnemonics for MFUN1; it is the same for the rest of the registers.
(V.)PLC.HFUN1
(V.)PLC.HFUN2
(V.)PLC.HFUN3
(V.)PLC.HFUN4
(V.)PLC.HFUN5
(V.)PLC.HFUN6
(V.)PLC.HFUN7
Variable that can only be read from the program and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The channel indicates in these registers the H functions pending execution.
There is a register for each channel. The mnemonics for each channel are the following. Here
is an example of the mnemonics for HFUN1; it is the same for the rest of the registers.
V.PLC.SPN1C1 Channel ·1·.
V.PLC.SPN1C2 Channel ·2·.
V.PLC.SPN1C3 Channel ·3·.
V.PLC.SPN1C4 Channel ·4·.
V.PLC.MFUN1 Channel ·1·.
V.PLC.MFUN1C1 Channel ·1·.
V.PLC.MFUN1C2 Channel ·2·.
V.PLC.MFUN1C3 Channel ·3·.
V.PLC.MFUN1C4 Channel ·4·.
V.PLC.HFUN1 Channel ·1·.
V.PLC.HFUN1C1 Channel ·1·.
V.PLC.HFUN1C2 Channel ·2·.
V.PLC.HFUN1C3 Channel ·3·.
V.PLC.HFUN1C4 Channel ·4·.