Fanvil F52 - Basic Functions; Making a Call; Answering a Call; Do Not Disturb (DND)

Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: fanvil@fanvil.com www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
- 15 -
3 Basic Functions
3.1 Making a call
3.1.1 Call Device
Calls can be made using two different devices:
1. Handset - Pick up the handset. The
icon will be shown on the LCD screen.
34. Speakerphone - Press the Speaker button. The
icon will be shown on the LCD screen.
The number may also be dialed first. Then the method of speaking can be chosen.
3.1.2 Call Methods
Use one of the following methods to place a call.
1. Dial the desired number using the keypad.
2. Press the REDIAL button to redial the last number called.
3. Press the Dial softkey to make the call if necessary.
3.2 Answering a call
If the phone is idle, lift the handset, press the Speaker button or Answer softkey to answer Using the speaker
phone to answer.
If the phone is in use, press the Answer softkey.
During the conversation, you can alternate between Handset and Speaker phone by pressing the
corresponding buttons or picking up the handset.
3.3 Do Not Disturb (DND)
Press the DND softkey then use vol-/vol+ to select Phone,Line,Disabled to active or disabled DND Mode.
If you select Phone ,New incoming calls will be rejected and the display will show:
icon.
If you select Line,you should press Down key then select Line1 or Line2 to Enable ,after new incoming calls
will be rejected and the display will show:
icon.
If you select Disabled,Incoming calls will be ring and stored in the Call History.
3.4 Call Forward
This feature allows forwarding an incoming call to another phone number. The display shows icon.