Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: fanvil@fanvil.com www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
Status Shows registration status. Will show “Registered” if registered
or “Unapplied” if not registered.
Server Address IAX2 server address.
Server Port IAX2 server port. Default is 4569.
IAX2 account name for registration
Password IAX2 registration password.
IAX2 phone number (usually the same as IAX2 account name).
IAX2 local port. Default is 4569.
Voice Mail Number Voice mail number.
If the IAX2 server supports echo test and the echo test number is
non- numeric, this number can be used to replace the echo test
text. This allows dialing a number to perform an echo voice test.
This function is provided to test whether communication through
the server.
Refresh Time Expiration time of IAX2 server registration. Allowed values are
between 60 and 3600 seconds.
Enable Registration Enable/Disable IAX2 registration.
Enable G.729AB Enable/Disable G.729 codec.
8.3.3.3 STUN Config
STUN support is configured in this page.
STUN – Simple Traversal of UDP through NAT – A STUN server allows a phone in a private network to
know its public IP and port as well as the type of NAT being used. The phone can then use this information
to register itself to a SIP server so that it can make and receive calls while in a private network.
To Next Page
Loading...
