Fanvil F52 - Service Port Configuration

Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: fanvil@fanvil.com www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
- 44 -
Disable: Disable Port VALN
Enable: Specify a VLAN ID for the LAN port which is different
from WAN ID
LAN Port VLAN ID Used when the VLAN ID is different from WAN ID. Range is
0-4095
8.3.2.4 Service Port
Set the port values for Telnet/HTTP/RTP on this page.
Field Name
Explanation
Web Server Type Specify Web Server Type – HTTP or HTTPS
HTTP Port Port for web browser access. Default value is 80. To enhance
security, change this from the default. Setting this port to 0 will
disable HTTP access.
Example: The IP address is 192.168.1.70 and the port value is 8090,
the accessing address is http://192.168.1.70:8090.
HTTPS Port Port for HTTPS access. Before using https, an https authentication
certification must be downloaded into the phone.
Default value is 443. To enhance security, change this from the
default.
Telnet Port Port for Telnet access. The default is 23.