Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: fanvil@fanvil.com www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
8 Web Configuration
8.1 Introduction of configuration
8.1.1 Configuration Methods
There are three methods which can be used to configure this phone:
1. Phone keypad – As discussed in previous sections
2. Web browser - Recommended way
3. Telnet with CLI command
8.1.2 Password Configuration
There are two levels of access: root level and general level. A user with root level access can browse and
set all configuration parameters, while a user with general level can set all configuration parameters except
server parameters for SIP or IAX2.
• Default user with general level:
Username: guest
Password: guest
• Default user with root level:
Username: admin
Password: admin
The default password for the phone screen menu is 123.
8.2 Setting via web browser
Enter the phone’s IP address into the address bar of the web browser. This assumes that the pc and the phone
are on the same subnet. Note: Internet Explorer, Firefox, Chrome, or Safari are supported browsers.
If the IP address is not known, it can be displayed on the phone’s LCD by pressing the Menu->Status.
After entering the IP address, the following screen is displayed.
To Next Page
Loading...
