EasyManua.ls Logo

Fanvil F52 - Time and Date Settings

Fanvil F52
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: fanvil@fanvil.com www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
- 46 -
Field Name
Explanation
DHCP Client Table IP-MAC mapping table. If the LAN port of the phone connects to a
device, this table will show its IP and MAC address.
Leased Table Name Name of the lease table.
Start IP Address Beginning IP address of the lease table.
End IP Address
Ending IP address of the lease table. A device connected to the
LAN port will get an IP address between Start IP and End IP.
Subnet Mask
Subnet Mask of the lease table.
IP Gateway Network Gateway of the lease table.
Leased Time Time IP address assignments will persist. Unit is minutes.
DNS Server Address
IP address of DNS server.
Add Click this button to add this lease table
DHCP Lease Table
Delete
Enter the table name and click the Delete button to remove a DHCP
lease table.
Enable DNS Relay Activates DNS Relay in the phone. Default is enabled.
Notes:
11. The size of lease table cannot be larger than the quantity of C network IP address. It is
recommended to use the default lease table without modification
12. If the DHCP lease table is modified, the phone must be rebooted.
8.3.2.6 TIME&DATE
Set the time zone and SNTP (Simple Network Time Protocol) server on this page. Daylight savings time
configuration and manual time and date entry are also done on this page

Table of Contents

Related product manuals