Fanvil F52 - DHCP Service Settings

Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: fanvil@fanvil.com www.fanvil.com Beijing Tel:+86-10-5753-6809
Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-203-50737
- 45 -
RTP Port Range Start
Set the beginning value for RTP Ports. Ports are dynamically
allocated.
RTP Port Quantity
Set the maximum quantity of RTP Ports. The default is 200.
Notes:
8. Any changes made on this page require a reboot to become active.
9. It is suggested that changes to HTTP Port and Telnet ports be values greater than 1024.
Values less than 1024 are reserved.
10. If the HTTP port is set to 0, HTTP service will be disabled.
8.3.2.5 DHCP SERVICE