Scanner Control
To connect to the scanner:
1. Enter the scanner's IP address.
Figure 7-2 Connect page: Enter the IP address
2. Click Connect to retrieve the details of the scanner.
Figure 7-3 Connect to Scanner
If the IP address is not associated with an active laser scanner, an error message is displayed.
3. If a connection to a supported FARO Focus scanner is successful, Control becomes active and
green. Click to control the scanner through the HTML user interface.
FARO
®
Focus Premium Laser Scanner User Manual
Chapter 7: Special Scanning Modes
FARO Focus Premium (March 2022) Page106of157
To Next Page
Loading...
