3-54
Frequently Used Functions
Operation Procedure 1 (Setting Threshold mode to Edge height)
1 Press
, and then use to select the
menu.
Display “Detection” on the main menu.
2 Press
, and then use to select the
menu.
Display “Threshold mode” on the sub menu.
3 Press
, and then use to select the
menu.
Display “Edge height”.
4 Use to select the option to set.
Select Edge direction.
5 Press
.
Set the duration over which to compare for
changes of received light amounts (Edge offset).
6 Press
.
The setting is saved, and the OLED display returns
to the sub menu.
Continued on next page
1
2
MENU
OK
TEACH
ESC
S7
Detection
1
2
MENU
OK
TEACH
ESC
D2
Threshold mode
1
2
MENU
OK
TEACH
ESC
D2
Edge height
<Options>
Both, Positive, Negative
1
2
MENU
OK
TEACH
ESC
D2
Both
<Options>
A time greater than or equal to the
“Response time” can be set.
1
2
MENU
OK
TEACH
ESC
D2
2500 μs
Offs.
1
2
MENU
OK
TEACH
ESC
D2
Threshold mode
To Next Page
Loading...