Festo CMMP-AS-C5-11A-P3-M0 User Manual

CMMP-AS-...-M0
Festo – GDCP-CMMP-M0-HW-EN – 1511c – English 5
5.4 Connect motor controller CMMP-AS-...-M0 to the power supply 57.....................
5.5 Connecting a PC 57..........................................................
5.6 Check operating status 58.....................................................
6 Service functions and diagnostic messages 59....................................
6.1 Protective and service functions 59..............................................
6.1.1 Overview 59........................................................
6.1.2 Phases and mains failure detection 59...................................
6.1.3 Overload current and short-circuit monitoring 59..........................
6.1.4 Overvoltage monitoring for the intermediate circuit 59......................
6.1.5 Temperature monitoring for the heat sink 59..............................
6.1.6 Monitoring of the motor 60............................................
6.1.7 I2t monitoring 60....................................................
6.1.8 Power monitoring for the brake chopper 60...............................
6.1.9 Commissioning status 61.............................................
6.1.10 Rapid discharge of the intermediate circuit 61.............................
6.1.11 Detection of faults in conjunction with the functional safety engineering 61.....
6.2 Operating mode and diagnostic messages 61.....................................
6.2.1 Operation and display components 61...................................
6.2.2 7-segment display 62................................................
6.2.3 Acknowledgement of error messages 63.................................
6.2.4 Diagnostic messages 63..............................................
7 Maintenance, care, repair and replacement 64....................................
7.1 Maintenance and care 64......................................................
7.2 Repair 64..................................................................
7.3 Replacement and disposal 64..................................................
7.3.1 Dismounting and installation 64........................................
7.3.2 Disposal 64........................................................
A Technical appendix 65........................................................
A.1 Technical data CMMP-AS-...-M0 65..............................................
A.1.1 Interfaces 73.......................................................
A.2 Supported encoders 79.......................................................
B Diagnostic messages 81......................................................
B.1 Explanations of the diagnostic messages 81......................................
B.2 Diagnostic messages with instructions for fault clearance 82.........................
Index 121........................................................................

Festo CMMP-AS-C5-11A-P3-M0 Specifications

General

Brand	Festo
Model	CMMP-AS-C5-11A-P3-M0
Category	Controller
Language	English