Festo CP Series User Manual

Different types of manual override
The manual override is intended for use as follows:
Manual override design Mode of operation
Manual override with
automatic reset (pushing)
Manual override is reset by spring
force.
Manual override locking Manual override remains active,
until it is reset by hand.
The following types of manual override can be used
with the CP terminal.
Locking manual override Pushing manual override
Slide of locking manual override to pilot
solenoid 14
Slide of locking manual override to
pilot solenoid 12
Button of pushing manual override to pilot
solenoid 14
Button of pushing manual override to
pilot solenoid 12
Fig. 4/1: Different types of manual override
4. Commissioning
CPV... 9802 4-5

Festo CP Series Specifications

General

Type	Controller
Series	CP
Category	Controller
Manufacturer	Festo
Operating Voltage	24 V DC
Protection Class	IP20
Communication Interface	CANopen, PROFINET
Programming Environment	Festo Automation Suite
Number of Axes	Varies (depending on model, typically up to 6 or more)