Festo CP Series User Manual

CAUTION
Before commissioning the CP valve terminal, return
the manual override to basic position.
Actuate the manual override with locking Reaction of valve
Push the slide of the
manual override down
as far as possible.
The valve:
– switches
Leave slide in lower
position.
– remains switched
Push the slide of the
manual override up as
far as possible.
– returns to basic position
(not with 5/2-way double
solenoid valve, Ident.
code J)
4. Commissioning
4-8 CPV... 9802

Festo CP Series Specifications

General

Type	Controller
Series	CP
Category	Controller
Manufacturer	Festo
Operating Voltage	24 V DC
Protection Class	IP20
Communication Interface	CANopen, PROFINET
Programming Environment	Festo Automation Suite
Number of Axes	Varies (depending on model, typically up to 6 or more)