Maintenance Instructions
Seite/Page 124 Panda PMS 8.000 NE - 42 NE Manual.R05 - Kapitel/Chapter 6: Maintenance Instructions 22.3.11
Fig. 6.10.2-28: Mount the ball bearing
By doing that, the ball bearing is pressed onto the shaft.
If necessary, hold the crank shaft with an appropriate wrench to
keep the diesel engine from rotating concurrently.
Press the ball bearing on as far as possible.
(Tool: Wrench SW13 and SW22)
Fig. 6.10.2-29:
Hold up the crank shaft
Fig. 6.10.2-30: Remove tools
Remove tools
To Next Page