Fischer Panda Panda 8000 - 3.4 Panda transport box

Basics
19.8.14 Kapitel/Chapter 3: Basics - Seite/Page 31
Fig. 3.3-3: AC Control BoxAC Control Box
The AC Control Box contains the capacitors and the control
circuit board (VCS) for the generator.
At ND generators and generators with mini VCS the
capacitors and the VCS may be mounted at the generator.
The AC Control Box is not required for these generators.
representative picture
Fig. 3.3.1-4: Fischer Panda ManualFischer Panda Manual
The Fischer Panda Manual contains the following
components:
• Transparent sheet with general information, guarantee
conditions, installation inspection, and service list.
• Generator manual with attached remote control panel
manual
• Spare part catalogue „Installation & Service Guide“
• Engine manual of the engine manufacturer
• Wiring diagram of the generator
Optional components
Optional components could be for example:
• Fuel pump
• Installation kits
• Radiators
• ect.
3.4 Panda transport box
3.4.1 Bolted Fischer Panda transport box
1. Remove the bolts for cover / sidewalls
2. Remove the cover
3. Remove the loose accessories
4. Remove the bolts for sidewalls / floor pallet
5. Remove the sidewalls
6. Open the generator attachment