FISNAR I&J7300 - Utility Menu

I&J7000 Series Operating Manual
Section 3: Teaching Overview
Part # 561978B
Rev. H May 04
- Page 28 -
© 2003 I&J Fisnar Inc.
4.4. Utility Menu
Below is a list of functions which are found under Menu 1 -> Utility Menu:
Function
Description
Program
Opens the Program utility menu. Allows programs to be
copied, backed up, restored, or cleared.
Memory
Opens the Memory utility menu. Allows the robot
memory to be backed up, restored, or cleared.
Teach Pendant
Opens the Teach Pendant utility menu. Allows the
current program to be copied to the Teach Pendant for
transferring to another robot.
Relocate Data
Allows the position of a program to be corrected using
two reference points. Corrects for X offset, Y, offset and
angle of rotation.
Lock / Unlock Program
Locks or unlocks a program to enable or disable
program editing
Password
Allows the password to be set or reset for the current
program. Protects the program from unauthorized
editing.
Cycle Counter
Enables or disables the program cycle counter show in
the display when in run mode