FLENDER B3 A Series - Special Aspects of Gear Unit Lubrication and Preservation; Oil Filling and Oil Drain; Figure; Oil Filling Points and Oil Draining Points on Type B3.A Gear Units

4.4 Special aspects of gear unit lubrication and preservation
4.4.1 Oil 󹪝lling and oil drain
The diagram below shows the oil 󹪝lling points and the oil draining points on type B3.A gear units:




① Oil 󹪝lling point ③ Oil dipstick
② Venting screw or air 󹪝lter (screw plug) ④ Oil drain screw
Figure 4-9 Oil 󹪝lling points and oil draining points on type B3.A gear units
The diagram below shows the oil 󹪝lling points and the oil draining points on type B3SF gear units:






① Oil 󹪝lling point ③ Oil dipstick
② Venting screw or air 󹪝lter (screw plug) ④ Oil drain screw
Figure 4-10 Oil 󹪝lling points and the oil draining points on type B3SF gear units
The diagram below shows the oil 󹪝lling points and the oil draining points on a type B3.A gear unit
with auxiliary drive:
Application planning
4.4 Special aspects of gear unit lubrication and preservation
Assembly and operating instructions A5051en
Edition 06/2020 57