Introduction
1
1.1 General information
Purpose of the operating instructions
These operating instructions describe the gear unit and provide information about handling it -
from assembly to maintenance.
Please keep these operating instructions for later use. Please read these operating instructions
prior to handling the gear unit and follow the information in them.
Note
Disclaimer
Please make sure that every person who is commissioned to work on the gear unit has read
and understood these operating instructions prior to handling the gear unit and adheres to all
of the points. Failure to observe these operating instructions can cause product or property
damage or personal injury.
Flender does not accept any liability for damage or operating failures which are due to non-
adherence to these operating instructions.
The gear unit described in these instructions reflects the state of technical development at the
time these operating instructions went to print.
In the interest of technical advancements, Flender reserves the right to make changes to the
individual components and accessories which are considered necessary for improving their
performance and safety, while maintaining their essential features.
Basic knowledge required
In order to understand these operating instructions, you will need the following general
knowledge about gear units. You will also need a basic understanding of the following topics:
● Application planning
● Assembly
● Commissioning
● Maintenance
Documentation landscape
These operating instructions form part of the delivery of your gear unit.
REDUREX Gear unit 5200en
Operating Instructions 03/2019 11
To Next Page
Loading...
