A taconite seal is illustrated in the diagram below:
① Grease nipple ③ Labyrinth, filled with grease, can be regreased
② Lamellar seal ④ Rotary shaft sealing ring
Figure 3-8 Taconite‐seal
3.6.4 Tacolab seal
Application
Only use Tacolab seals with pressure lubrication and with a reduced oil level.
Features
Tacolab seals are non-contact, low-maintenance seals that do not wear. It is not therefore
necessary to interrupt operation in order to service or replace them.
The Tacolab seal is a combination of two sealing elements:
● Labyrinth seal comprising two labyrinth sealing rings to prevent the escape of lubricating oil
● Grease-filled dust seal (comprising a labyrinth and a lamellar seal) to allow operation of the
gear unit in extremely dusty environments
Description
3.6 Shaft seal
REDUREX Gear unit 5200en
Operating Instructions 03/2019 27
To Next Page
Loading...
