3.12 Oil level indicator
The following components for visual monitoring of the oil level can be mounted on the gear unit:
● Oil sight glass
● Oil level indicator
● Oil dipstick
Check the oil level when the gear unit is stationary and with the oil in a cool state.
Further information
Further information about the oil level indicator and checking the oil can be found in the
operating instructions BA 7300 in the complete documentation for the gear unit.
Further information and a detailed illustration of the gear unit and the position of the mounted
components can be found in the dimension drawing in the complete documentation for the gear
unit.
3.13 Oil level monitoring system
Introduction
Depending on the order specification, the gear unit can be equipped with an oil-level monitoring
system using a filling-level limit switch.
The oil-level monitoring system has been designed to check the oil level when the gear unit is
at a standstill before it starts.
Mounting position
When using an oil-level monitoring system it is especially important to ensure that the gear unit
is in a horizontal mounting position.
Further information
Further information and a detailed illustration of the gear unit and the position of the mounted
components can be found in the dimension drawing in the complete documentation for the gear
unit.
Further information about oil level monitoring, control instructions and the technical data can be
found in the operating instructions for the oil level monitor, in the list of equipment and in the
separate data sheet in the complete documentation for the gear unit.
Description
3.12 Oil level indicator
REDUREX Gear unit 5200en
38 Operating Instructions 03/2019
To Next Page
Loading...
