● Check that the guards over rotating parts are securely fastened.
Contact (accidental or deliberate) with rotating parts is not permitted.
● Perform potential equalisation in accordance with the applicable regulations and guidelines.
If no threaded holes are available on the gear unit for an earth connection, please take
suitable alternative measures. This work must always be done by specialist electricians.
● Protect the cable entries against penetrating moisture.
Further information
Further information about the gear unit and all assembled elements can be found in the
operating instructions for assembled elements in the complete documentation for the gear unit.
You can find additional technical specifications in the separate data sheet in the complete gear
unit documentation.
Mounting
5.9 Final work
REDUREX Gear unit 5200en
Operating Instructions 03/2019 81
To Next Page
Loading...
