Flexim FLUXUS WD - Page 162

Annex
A Menu structure FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
162
Event-based storing of measured values
Trigger
Special functions Options
Inputs Channel x
Condition
Event trigger
Temperature Current Voltage Binary
Enable Enable Enable Enable Select Rx
Pt100/Pt1000 Source item Source item Negate input Enable Rx
 Yes
 No
Source item
Condition
Trigger value
Function
Yes
 MAX (x>limit)
 MIN (x<limit)
 Within range
 Out of range
 ERR (x=fail)
 Out of range
 ERR (x=fail)
 MAX (x>limit)
 MIN (x<limit)
 ERR (x=fail)
Type
Range center Trigger value
Range width Hysteresis Non-hold Hold for a while Hold
Hold interval
Glitch interval
[1]
Input info
 Within range
 Out of range
 MAX
 MIN
 ERR
Test signal
Range center Trigger value
Range width Hysteresis
Glitch interval
Failure delay
Action
Special functions
Data logger
Configuration Storage rate (trig.)
Logger channels Buffer time 
Start storing Buffer time 
Event-based Storage rate FastF
With input Ringbuffer
Legend
[1] depending on the selection of the function
Storage rate w/o trig.
Storage mode
1
2